Skip to content

Cost per square

Roofing cost per square in Denver

A roofing square is 100 sq ft of roof surface, and Denver roofers publish $400–$730 per square installed for architectural asphalt in 2026, $550–$1,150 for Class 4 impact-resistant shingles and $700–$2,300 for metal. Multiply by your squares, measured on the slope plus waste, to check a quote.

Bands combine 3 Denver-metro sources that print per-square figures. Published third-party figures, not our prices.

An independent publisher, not a roofing contractor. Facts last checked . How we source.

On this page
  1. What a roofing square is
  2. Published Denver bands
  3. Each source's figure
  4. Pitch turns floor area into squares
  5. Waste and ordered squares
  6. Calculator
  7. A worked example
  8. Per square vs per square foot
  9. Common questions

What a roofing square is

Roofing materials are sold and priced in squares: enough shingles, underlayment or panels to cover 100 square feet of roof. Bundles of asphalt shingles are usually packaged three to a square. A Denver bid that says "28 squares" means about 2,800 sq ft of sloped roof surface, not a 2,800 sq ft house.

Footprint versus sloped roof area A roof rises over a run of 12 units by a rise of 6 units. The sloped length is longer than the run by the pitch factor, 1.118 at 6:12. Run: 12 in (footprint) Rise: 6 in Slope: 13.4 in (what you buy) Pitch factor 6:12 = √(1 + 0.5²) = 1.118
The roof surface is longer than the footprint it covers. That ratio, the pitch factor, is why squares exceed footprint area.

Published Denver bands per square

Installed price per roofing square in the Denver metro, 2026 (published)
MaterialBandSources
Architectural asphalt shingle$400–$7303
Class 4 impact-resistant shingle$550–$1,1502
Metal (standing seam or stone-coated steel)$700–$2,3003
Concrete or clay tile, slate and synthetic slate$1,200–$2,5001

Gates Roofing also prints 3-tab asphalt at $350–$450 per square and "designer" shingles at $700–$1,000+. Elk Roofing prices whole roofs rather than squares, so it does not appear in these bands.

Only one source for tileTile and slate rest on a single per-square figure (Gates Roofing). Treat it as the least settled row; Core Roofing quotes concrete tile only as a whole-roof total ($35,000–$58,000).

Each source's per-square figure

The sources overlap but do not agree. Core Roofing prices named Owens Corning product lines on its own jobs, which puts it at the top; Road Home Exteriors converts its $4–$11 per sq ft range.

Published installed $ per square by source and material, Denver 2026
Published installed $ per square by source and material, Denver 2026 Architectural asphalt: Core Roofing Systems: $650 to $730; Class 4 impact-resistant: Core Roofing Systems: $755 to $1,150; Metal: Core Roofing Systems: $1,275 to $2,300; Architectural asphalt: Gates Roofing: $450 to $600; Class 4 impact-resistant: Gates Roofing: $550 to $750; Metal: Gates Roofing: $800 to $1,500; Tile and slate: Gates Roofing: $1,200 to $2,500; Architectural asphalt: Road Home Exteriors: $400 to $700; Metal: Road Home Exteriors: $700 to $1,100 $0$680$1,350$2,030$2,700 Architectural asphalt: Core R… $650–$730 Class 4 impact-resistant: Cor… $755–$1,150 Metal: Core Roofing Systems $1,275–$2,300 Architectural asphalt: Gates … $450–$600 Class 4 impact-resistant: Gat… $550–$750 Metal: Gates Roofing $800–$1,500 Tile and slate: Gates Roofing $1,200–$2,500 Architectural asphalt: Road H… $400–$700 Metal: Road Home Exteriors $700–$1,100
Show the data as a table
Material and sourceLowHigh
Architectural asphalt: Core Roofing Systems$650$730
Class 4 impact-resistant: Core Roofing Systems$755$1,150
Metal: Core Roofing Systems$1,275$2,300
Architectural asphalt: Gates Roofing$450$600
Class 4 impact-resistant: Gates Roofing$550$750
Metal: Gates Roofing$800$1,500
Tile and slate: Gates Roofing$1,200$2,500
Architectural asphalt: Road Home Exteriors$400$700
Metal: Road Home Exteriors$700$1,100

Sources: Core Roofing Systems (Denver metro) (dated 2026, read 2026-09-23); Gates Roofing (Denver) (dated 2026-02-02, read 2026-09-23); Road Home Exteriors (Denver metro and Front Range) (dated 2026, read 2026-09-23).

  • Core Roofing Systems (Denver metro): Prices its own Denver work by square: Owens Corning Duration architectural $650–$730/sq ($16,000–$23,000 total); Duration Flex IR Class 4 $755–$825/sq ($18,000–$25,000); Woodcrest Class 4 $925–$1,150/sq; stone-coated steel $1,275–$2,300/sq; concrete tile $35,000–$58,000; TPO $13,000–$24,000 and EPDM $14,000–$26,000 on low-slope.
  • Gates Roofing (Denver): Per square installed: 3-tab $350–$450; architectural $450–$600; Class 4 impact-resistant $550–$750; designer $700–$1,000+; metal $800–$1,500+; tile and slate $1,200–$2,500+. Typical single-family total $12,000–$28,000, and $15,000–$22,000 for a moderately complex 2,000–2,500 sq ft home. Tear-off and disposal $1,000–$2,500; ventilation $300–$1,500; permit $100–$500.
  • Road Home Exteriors (Denver metro and Front Range): Quotes $4–$11 per square foot of roof area installed, which is $400–$1,100 per square, and $12,000–$28,000+ for most full replacements; $15,000–$22,000 for a 2,000–2,500 sq ft home. Permit $150–$400.

Pitch turns footprint into squares

Pitch is the rise in inches per 12 inches of run. The pitch factor is √(1 + (rise ÷ 12)²): multiply the footprint (including overhangs) by it to get roof surface. The factor is geometry, the same on every roof.

Pitch factors for common Denver roof pitches
PitchFactor1,500 sq ft footprint becomes
3:121.03115.5 squares
4:121.05415.8 squares
5:121.08316.3 squares
6:121.11816.8 squares
7:121.15817.4 squares
8:121.20218.0 squares
9:121.25018.8 squares
10:121.30219.5 squares
12:121.41421.2 squares

Steeper roofs also cost more per square to install, because crews need harnesses, roof jacks and more time. That premium is part of why the published bands are wide.

Waste and ordered squares

A good quote shows two numbers: measured squares and ordered squares. The difference is waste, the shingles cut away at hips, valleys and rakes, plus starter and ridge courses. A plain gable may need around 10%; a roof with many hips, valleys and dormers needs more. If two quotes differ on ordered squares by more than a few percent, ask each to show its measurement (tape, drone or aerial report).

Squares calculator

Roof squares calculator

Enter the roof's footprint (the area the roof covers seen from above, including overhangs), its pitch, and a waste allowance. Everything runs in your browser; nothing is sent anywhere.

–

Formula: footprint × √(1 + (rise ÷ 12)²) = sloped roof area; ÷ 100 = squares; × (1 + waste) = squares to order. A roofer's measurement (tape, drone or satellite report) replaces this number on the quote.

A worked example

Take a 1,400 sq ft footprint at 7:12 with a 15% waste allowance:

  1. Pitch factor at 7:12 = √(1 + 0.583²) = 1.158.
  2. Roof surface = 1,400 × 1.158 = 1,621 sq ft = 16.2 squares.
  3. Ordered = 16.2 × 1.15 = 18.6 squares.
  4. At the published architectural band ($400–$730): about $7,440–$13,580.

That is arithmetic on published figures, not a price. Adders such as decking replacement and extra layers come on top; see the cost hub.

Per square versus per square foot

Some sources quote per square foot of roof ($4–$11 from Road Home Exteriors), which is the same thing divided by 100: $4 per sq ft is $400 per square. Be careful with any figure "per square foot of home": it is a different, floor-area basis, and it cannot be converted without the footprint and pitch.

Common questions about this cost

How many square feet is a roofing square?

One hundred square feet of roof surface. A 2,000 sq ft roof is 20 squares. It is measured on the slope, so a steep roof has more squares than its footprint suggests.

What does a square of shingles cost installed in Denver?

Published 2026 Denver bands are $400–$730 per square for architectural asphalt and $550–$1,150 for Class 4 impact-resistant shingles, installed. Those include labor and normal tear-off on most sources; check each quote.

How many squares is a 2,000 sq ft house?

It depends on the footprint, overhangs and pitch, not the heated floor area. A two-story 2,000 sq ft house may have a 1,000–1,200 sq ft footprint, which at 6:12 pitch is about 12–15 squares before waste. Use the calculator with your own footprint.

Why do roofers add waste to the squares?

Shingles are cut at hips, valleys, rakes and around penetrations, and starter and ridge courses use extra material. Ten percent is common on a simple gable; cut-up roofs need more. A quote should show both measured and ordered squares.

Get roofing quotes in the Denver metro

Free and no obligation. Tell us the job and ZIP; we check whether a partner roofer covers it before passing anything on.

Enter a Denver-metro ZIP (800–804). Outside that, we do not have a partner yet.
Please add your name.
A phone number is how the roofer reaches you.
Please add a working email.
Please add the street address for the job.
Get roofing quotes